Unit 3: CNC Pipe Cutting Introduction

Activities
Learning Module SCORM/AICC
Type: Learning Module SCORM/AICC  
Learning Module SCORM/AICC
Type: Learning Module SCORM/AICC  
CNC Pipe Cutting
DSC_4443.JPG
Objectives

The objectives of this unit are for the student to be able to:
  1. Know the set-up, operation and shutdown procedures for a CNC pipe cutting system.
  2. Demonstrate startup procedures and proper loading of material into a CNC pipe cutting system.
  3. Demonstrate the proper entry of machine, cutting or welding parameters as documented on a cutting or welding procedure into controls found on a CNC pipe cutting system.
  4. Make various cuts using a CNC pipe cutting system.
  5. Demonstrate the proper unloading of material and and shut-down procedures a CNC pipe cutting system.

To-do List

  1. When your instructor lectures on this unit and demonstrates the safe use of this equipment, take complete notes being mindful of the five objectives for this unit as stated above.
  2. Click on the Unit 3 Assignments link shown on the left side of this page and follow the instructions.  Take notes as necessary.
  3. Obtain a copy of the SWIC Orbital Tube Welding Binder from your instructor and read it in its entirety.  Take notes as necessary being mindful of all safety requirements and the five objectives for this unit.
  4. At the direction of your instructor, practice using the CNC pipe cutting system.
  5. Prepare for testing on the five unit objectives as noted above.  Your instructor will inform you of the testing schedule for this unit.
Last modified: Thursday, 22 July 2021, 4:27 AM